Production in Livestock and Industry Facilities:

To produce in Livestock and Industry facilities, the primary requirement is raw materials. If you have sufficient raw materials, you can produce goods in these sectors. In contrast, the Agriculture and Mining sectors do not require raw materials, as they produce either raw materials or finished products directly. By processing the raw materials produced or purchased, you can obtain the finished products to sell in your store. Each product has a certain quality, which can be improved through R&D. Let’s examine how quality calculations are made in production facilities based on raw materials and product quality.

Product Production Without Raw Materials:

For example, to produce Avocado from an Avocado Orchard, the R&D development has been completed up to 50 quality points. In this case, 50 quality Avocados can be produced directly from the Avocado Orchard without requiring any raw materials.

Single-Raw-Material Product Production:

For example, to produce Flower Honey in the Livestock sector, the R&D development has been completed up to 70 quality points. The only raw material required is glass, which has been purchased at 50 quality and stored in the logistics warehouse. The Flower Honey product has a raw material ratio of 50%.

The calculation for the Flower Honey quality is as follows:
70 Quality (Flower Honey R&D) + 50 Quality (Glass Raw Material) = 120 / 2 = 60 Quality Flower Honey

Here’s the simplified calculation:

  • The R&D quality for Flower Honey is 70.
  • The raw material, glass, has a quality of 50.
  • The average of these two qualities is 60. Therefore, the Flower Honey produced in the Apiary will have a quality of 60.

Calculation Breakdown:
70 + 50 = 120
120 / 2 = 60

Multi-Raw-Material Product Production:

For example, to produce Deodorant in the Industry sector, the R&D development has been completed up to 80 quality points. The raw material ratio for Deodorant is 66.67%. The raw materials required are aluminum at 40 quality and chemicals at 50 quality, both stored in the logistics warehouse.

The calculation for the Deodorant quality is as follows:
80 Quality (Deodorant R&D) + 40 Quality (Aluminum) + 50 Quality (Chemical) = 170 / 3 = 56.67 Quality Deodorant

Here’s the simplified calculation:

  • The R&D quality for Deodorant is 80.
  • The aluminum quality is 40.
  • The chemical quality is 50.
  • The average of these three qualities is 56.67

Calculation Breakdown:
80 + 40 + 50 = 170
170 / 3 = 56.67

R&D Calculations for Next-Generation Products (White Goods, Electronics, Jewelry, Eco, Flower Shops):

The examples above cover quality calculations for older-generation stores. However, next-generation products have raw material ratios specific to each product. These ratios can be viewed through the market status screen for the desired product.

TicPhone Production Quality Calculation Example:
The raw material ratio for TicPhone is 20%.

The raw materials required for TicPhone production are as follows:

  • Steel (3.33% raw material ratio)
  • LED Screen Panel (3.33% raw material ratio)
  • Mobile Motherboard (3.33% raw material ratio)
  • Li-Ion Battery (3.33% raw material ratio)
  • Touch Screen (3.33% raw material ratio)
  • Mobile Processor (3.33% raw material ratio)

The TicPhone R&D quality is 70. The raw material qualities in the logistics warehouse are as follows:

  • Steel: 100
  • LED Screen Panel: 90
  • Mobile Motherboard: 80
  • Li-Ion Battery: 70
  • Touch Screen: 60
  • Mobile Processor: 50

Let’s calculate the quality of TicPhone production:

Average Quality of Raw Materials:

  • Total raw material qualities: 100 + 90 + 80 + 70 + 60 + 50 = 450
  • Number of raw materials: 6
  • Average quality: 450 / 6 = 75
  • Raw material quality contribution: 75 × 0.20 = 15

    Result Table:

    Raw MaterialQualityContribution
    Steel1003.33
    LED Display Panel903.00
    Mobile Motherboard802.67
    Li-Ion Battery702.33
    Touchscreen602.00
    Mobile Processor501.67

    Total Raw Material Contribution: 15 Quality

TicPhone Product Quality Contribution:

  • TicPhone R&D quality: 70
  • Product ratio: 80% (0.80)
  • Product quality contribution: 70 × 0.80 = 56

Final Product Quality:

  • Total quality: 15 (raw material contribution) + 56 (product contribution) = 71 Quality TicPhone